Asia Vision Instrument

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

The FLAMMABILITY TESTer made of stainless steel shield of specified size. The shield is open at the top, it has transparent front sliding windows, and an opening of specified size is left at the bottom of the front to manipulation of the gas burner. A set of Bunsen burner of specified size attached at the bottom of the shield, the burner has an arrangement to slide.

            A clip is vertically held at the top of the instrument with the help of the rod, there is a set of the two –stenter pin plates, carrying pointer pins and attached to one side of its board surface, to prevent movement of the lower end of the test specimen during the application of the test flame. Each plate is secured at one to the side of the shield in the horizontal position.

            A set of specimen holder consisting of two U- shaped stainless steel plates between which the test specimen can be held in such a way that the fabric specimen is free at the bottom and is held at the top and sides so that the total exposed area is 50 x 305 mm the specimen holder will be positioned in the draught –free box vertically so that the ignition flame striker the centrally and 19 mm above the bottom edge of the specimen.

All parts of the instrument is bright chrome and bright buffing of stainless steel parts for corrosion resistance long life

Note: we will not supply any gas/gas cylinder.

Size of the Test Chamber                                             : 300 x300 x 760mm

Size of the Gas Burner                                                   : about 150 long x 9 mm internal diameter

Size of the test specimen                                             : 200 x 160 mm

Size of the flame                                                              : 38 mm

Burner to specimen bottom edge distance         : 19mm

             Determination of effect of ageing on various physical properties of different materials may be carried out by heating the material under test inside an air oven so that the effects of long term ageing are reproduced within a much shorter duration of time .for this determination, physical properties of the material under test are determined before ageing and ageing the test specimen at the specified temperature for a set duration of time and subsequent to the room temperature before conducting the tests again.

                  Determination of various physical characteristics of different materials and products at elevated temperature may be carried out by heating the test specimen to the appropriate temperature inside a constant temperature air oven and determining the required characteristics with the specimen kept under the same temperature. For this purpose the equipment needed for conducting the determination can either be kept inside the oven along with the test specimen, or if this is not feasible because of certain constrains, by taken the heated specimen out from the oven and conduction the test in still air within the shortest possible span of time.

Hydraulic

Hydraulic type specimen cutting press is suitable for Quick and accurate cutting of specimen. It can accommodate various types for cutting die and the pressure can be released quickly to remove the specimen.

Our company is highly esteemed in offering Specimen  Cutting Press to the clients. Specimen Dumble Cutting Press is manufactured using high-grade raw material and sophisticated technology by experienced professionals.  This product is well known in the market owing to superb attributes. Offered range is extensively used in various places for excellent quality attributes. This product can be avail in various specifications as per requirements of valuable clients. Offered range is stringently tested by quality analyzers on various parameters to make sure flawlessness and defect free delivery.

Features:

• Approved quality
• High performance
• Low Maintenance

Our company is widely appreciated in offering AVI Toxicity Tester to the clients. AVI Toxicity Tester is manufactured under the supervision of skilled and experienced professionals using top grade material and modern technology. This product is widely demanded and delivered to the valuable customers within the specified time frame. Offered range is rigorously checked by the quality inspectors on well defined parameters so as to make sure flawlessness and defect free range. This product is available in different specifications and can be customized on the specific demands of the customers.

Features:

• Light weight
• High temperature resistance
• Excellent performance

Technical Specification:

• Motor operated

• Gear box: worm reduction

• Compression plate set for compression springs

• Attachment for the tension springs

• Over travel protection

• Digital display of load and deflection(least count 0.1 mm)

• Movement by motor, worm reduction gear box and screw mechanism.

 The GSM Round Cutter is a specialized tool used in laboratories and textile industries to precisely cut samples of fabric, paper, or other materials into round shapes for testing and quality control. This cutter is designed to offer accuracy and consistency in sample preparation, which is crucial for accurate GSM (Grams per Square Meter) measurement and other quality tests.

Features:

• High Precision: Ensures accurate round cuts with minimal deviation, ideal for consistent testing and analysis.
• Durable Construction: Made from high-quality materials for long-lasting performance and reliability.
• Easy to Use: Simple operation with ergonomic design for comfortable handling and ease of use.
• Adjustable Sizes: Available in various sizes to accommodate different sample requirements.
• Versatile Application: Suitable for use in textile laboratories, research facilities, and quality control departments.

Specifications:

• Material: Stainless Steel or High-Quality Alloy
• Cutting Diameter: Various options (e.g., 50mm, 75mm, 100mm)
• Handle Type: Ergonomic, Non-Slip
• Weight: Varies based on size and material

Applications:

• Textile Testing
• Paper Sample Preparation
• Fabric Analysis
• Quality Control in Manufacturing

Aimed at prosperous growth in this domain, we are instrumental in offering an excellent quality range of Conditioning Chamber.